SELECT OPTION

Voodoo Lab Pedal Power Digital Power Supply

(해외배송 가능상품)
공급사 바로가기
249,000
310,000원
%
310000.00 249000
기본 정보
상품명
Voodoo Lab Pedal Power Digital Power Supply
소비자가
310,000원
판매가
249,000원
제조사
VoodooLab
원산지
USA
적립금
2,400원 (1%)
수량
수량증가수량감소

개인결제창을 통한 결제 시 네이버 마일리지 적립 및 사용이 가능합니다.

상품 옵션
옵션 선택

위 옵션선택 박스를 선택하시면 아래에 상품이 추가됩니다.

상품 목록
상품명 상품수 가격
Voodoo Lab Pedal Power Digital Power Supply 수량증가 수량감소 (  2400)
총 상품금액 0 (0개)
 


 







Isolated power specifically designed to make digital pedals sound their best.


Pedal Power Digital® is a linear (analog) power supply for high-current DSP-based pedal effects and accessories. With 4 completely isolated, filtered, and regulated output sections, Pedal Power Digital keeps your pedals dead quiet and free from high-frequency noise that occurs with digital "switching" power supplies.

Pedal Power Digital will properly power up to 4 digital power-hungry effects like those from Strymon, Eventide, Line 6, TC Electronic and more. Its compact size is perfect for small pedalboards, rack shelves, and as an additional power supply for larger boards.

Built to meet the needs of professional users, Pedal Power Digital will provide clean, consistent power, even under the poor AC line conditions often found on stage. Completely isolated output sections eliminate ground loops and unwanted interactions between effects, resulting in lower noise and noticeably improved tone.


Pedal Power® Digital features:

Four 9V isolated high-current 400mA output sections (2 with 12V option)
Powers Strymon, Eventide, Line 6 (excludes M9/M13), Boss Twin, TC Electronic Nova, Moog and more
Also compatible with all 9V battery operated pedals
Linear regulation and toroidal transformer for lowest possible noise
Temperature controlled variable speed fan
Compact design fits small pedalboards and rack shelves
Includes cables and detachable AC line cord
Engineered and handmade in the USA




Specifications

Input

Standard IEC connector  

120V 50/60Hz (North America model)  

100V 60Hz (Japan model)  

220-240V 50/60Hz (Europe/Australia model) Model

and input power are marked on bottom of unit.
 
Outputs:

5.5x2.1mm barrel connectors center negative  

Short circuit protected. 
 
Two 9V or 12VDC - 400mA  

Two 9VDC - 400mA
 
Physical:

4.9” wide x 3.4” deep x 1.8” tall (124 x 86 x 44 mm)  

1.5 lbs (0.68 kg)
 
Special:

Toroidal power transformer




Unpacking

Your Voodoo Lab Pedal Power Digital box should contain the following:

Pedal Power Digital unit

Warranty card AC line cord

DC Power cables:

5.5x2.1mm right angle black barrel (4)

5.5x2.5mm right angle red barrel (4)
 
Connections

Pedal Power Digital is powered directly from AC mains using the supplied detachable line cord.

This is a standard computer-type IEC line cord, so it’s easy to obtain a replacement or different length.
 
Important:

Pedal Power Digital is manufactured to operate from a specific line voltage (100V, 120V or 240V) which is marked on the bottom of the unit. Attempting to operate at the wrong voltage may cause permanent damage








1, 2) 9V and 12V high-current output pairs. Each pair is an isolated output section providing up to 400mA.
Note: The 9V and 12V outputs within a pair are not isolated from each other (their negative terminals are common). It is preferred to use only one from each pair. If using both, combined output should not exceed 400mA.
Important: Do NOT operate two high-current digital effects from the same isolated section by using both 9V and 12V jacks of the pair.
3, 4) 9V high-current outputs. Use for all devices which require 400mA or less.  
All 9V outputs can also power ordinary low-current battery operated pedals.
 
DC Power Cables The Pedal Power end of each supplied DC power cable has a black barrel connector. The other end has either another identical black barrel connector (center negative) or a 5.5x2.5mm red barrel (center positive). Use the standard right-angle black barrel connector cables with most common 9V battery operated pedals.
Before powering your pedal with the standard black barrel connector, you must verify that the pedal requires “center negative” polarity to prevent damage. Cables are available from Voodoo Lab to properly power “center positive” pedals.
 
Line 6   Line 6 M5 and Tone Core pedals, plus Pocket POD can be powered from any available 9V output using a standard black 5.5x2.1mm barrel cable.
You can power Line 6 modeling pedals, like DL4 or MM4, using the 12V outputs with a red 5.5x2.5mm barrel cable. This does not match the rating of the supplied Line 6 adapter, but does correctly power these pedals. Note that PODxt & HD, M9, M13 and the JM4 Looper cannot be powered by Pedal Power Digital.


Strymon All Strymon pedals (including the larger format Timeline) can be powered from any of the 9V outputs using a standard black 5.5x2.1mm barrel cable.
Important: Strymon pedals should only be powered from the 9V outputs. Attempting to power from a 12V output may permanently damage the pedal. Don’t do it, we warned you!


TC Electronic TC Electronic’s Nova pedals such as the Delay, Modulator and Reverb can be powered from either the 9V or 12V outputs using a standard black 5.5x2.1mm barrel cable. The 9V output does not match the rating of the supplied TC Electronic adapter, but does correctly power these pedals.
 
Important: While you can power the Nova pedals from either 9V or 12V outputs, do NOT operate two Nova pedals from the same isolated section by using both 9V and 12V jacks of the pair. This WILL exceed the 400mA current rating.
 
Other TC Electronic pedals which can be powered from a 9V battery, such as the Classic and TonePrint series, can operate from any of the 9V outputs.
 
Eventide The Eventide stompboxes (TimeFactor, ModFactor, PitchFactor and Space) can be powered from either the 9V or the 12V outputs using the red 5.5x2.5mm barrel cable. The 12V output does not match the rating of the supplied Eventide adapter, but does correctly power these pedals.
 
Important: While you can power the Eventide stompboxes from either 9V or 12V outputs, do NOT operate two Eventide pedals from the same isolated section by using both 9V and 12V jacks of the pair. This WILL exceed the 400mA current rating.


Additional Cables  The DC power cables supplied with your Pedal Power Digital are suitable for most common pedal effects. If you need additional cables, different lengths, reversed polarity, or a special connector, these are available from Voodoo Lab at our online store.
 
Also available are adapter cables:
 
Split Output Adapter: Provides two output jacks from a single Pedal Power Digital output. One side is ground lifted to minimize the possibility of ground loops and added noise.
 
Voltage Doubler Adapter: Combines two Pedal Power Digital outputs to make 18V or 24V at up to 400mA. Ideal for MXR Flanger and various Fulltone and Keeley products.
 

About Isolation Pedal Power Digital has four isolated output sections. This is sometimes referred to as “galvanic isolation” and means that there is no direct electrical connection between each output. Similarly, when you power your effects with batteries, they are also isolated because there is no electrical connection between the batteries.
 
Most power supplies are not isolated. Their output jacks are simply bussed together or use a daisy chain cable. This allows unwanted electrical current to flow between the outputs, commonly called a ground loop. The result is added noise. The isolated outputs of Pedal Power Digital eliminate this noise.
 
Another benefit of isolation is that you can power both negative ground and positive ground effects with Pedal Power Digital. Negative ground effects are by far the most common, however the Fuzz Face and Octavia are some well known examples of positive ground circuits. Attempting to power positive ground pedals together with negative ground pedals from a non-isolated power supply will not work and may even damage the supply.
 
There are a couple of other tricks you can get from an isolated supply like Pedal Power Digital. You can use a special Y-cable (voltage doubler cable) which connects two 9V outputs in series to provide an isolated 18V, or use the 12V outputs to get 24V. Occasionally, a pedal requires a bipolar supply, using two batteries for +9V and -9V. Isolated outputs work fine for this, non-isolated supplies do not.

배송정보

  • 배송 방법 : 택배
  • 배송 지역 : 전국지역
  • 배송 비용 : 3,000원
  • 배송 기간 : 3일 ~ 7일
  • 배송 안내 : - 산간벽지나 도서지방은 별도의 추가금액을 지불하셔야 하는 경우가 있습니다.
    고객님께서 주문하신 상품은 입금 확인후 배송해 드립니다. 다만, 상품종류에 따라서 상품의 배송이 다소 지연될 수 있습니다.

교환 및 반품정보

    교환 및 반품이 가능한 경우
    - 상품을 공급 받으신 날로부터 7일이내 단, 가전제품의
     경우 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우에는 교환/반품이 불가능합니다.
    - 공급받으신 상품 및 용역의 내용이 표시.광고 내용과
     다르거나 다르게 이행된 경우에는 공급받은 날로부터 3월이내, 그사실을 알게 된 날로부터 30일이내

    교환 및 반품이 불가능한 경우
    - 고객님의 책임 있는 사유로 상품등이 멸실 또는 훼손된 경우. 단, 상품의 내용을 확인하기 위하여
     포장 등을 훼손한 경우는 제외
    - 포장을 개봉하였거나 포장이 훼손되어 상품가치가 상실된 경우
     (예 : 가전제품, 식품, 음반 등, 단 액정화면이 부착된 노트북, LCD모니터, 디지털 카메라 등의 불량화소에
     따른 반품/교환은 제조사 기준에 따릅니다.)
    - 고객님의 사용 또는 일부 소비에 의하여 상품의 가치가 현저히 감소한 경우 단, 화장품등의 경우 시용제품을
     제공한 경우에 한 합니다.
    - 시간의 경과에 의하여 재판매가 곤란할 정도로 상품등의 가치가 현저히 감소한 경우
    - 복제가 가능한 상품등의 포장을 훼손한 경우
    - 고객님의 요청에 의해 악기의 주문제작이 들어간 경우
     (자세한 내용은 고객만족센터 1:1 E-MAIL상담을 이용해 주시기 바랍니다.)

    ※ 고객님의 마음이 바뀌어 교환, 반품을 하실 경우 상품반송 비용은 고객님께서 부담하셔야 합니다.
     (색상 교환, 사이즈 교환 등 포함)

서비스문의

    contact@musicforceglobal.com

커뮤니티

MYSHOP

CALL CENTER

02-3474-5150

MON - FRI AM 10:00 - PM 19:00

SAT AM 11:00 - PM 18:00

SUN,HOLIDAY OFF

LUNCH PM 13:00 - 14:00

BANK INFORMATION

KEB하나 122-910020-52504

예금주 : 뮤직포스글로벌네트웍스